Auto Ordnance 1911 Problems: The Ultimate Solution

Auto ordnance 1911 problems can be addressed by following proper maintenance and troubleshooting procedures. We will discuss common issues with the auto ordnance 1911 and provide practical solutions to ensure optimal performance and reliability.

Whether you are experiencing feeding problems, failure to eject, or accuracy issues, we have you covered. By implementing these tips and tricks, you can overcome potential obstacles and enjoy a smoother shooting experience with your auto ordnance 1911. So, let’s dive in and explore how to tackle these common problems effectively.

Common Auto Ordnance 1911 Problems

The auto ordnance 1911 is a beloved classic firearm, known for its reliability and solid performance. However, like any other handgun, it is not immune to issues that can arise from time to time. In this section, we will explore some common problems that might occur with the auto ordnance 1911, under the subheading: common auto ordnance 1911 problems.

Barrel-Related Issues

  • Barrel bushing wear: Over time, the barrel bushing can become loose or worn, leading to accuracy problems and decreased overall performance.
  • Barrel link breakage: The barrel link is a critical component that can sometimes break due to stress, leading to malfunctions and potential safety concerns.
  • Barrel pitting: Corrosion or improper cleaning can result in pitting on the barrel, affecting both reliability and accuracy.

Failure To Feed Issues

  • Magazine-related problems: Faulty or worn-out magazines can cause failure to feed issues, resulting in stoppages and failure to cycle properly.
  • Feed ramp polishing: A rough or improperly polished feed ramp can cause ammunition to fail to feed smoothly into the chamber.

Extraction Problems

  • Extractor tension: Insufficient extractor tension can result in failure to extract spent casings, leading to stovepipes or other extraction failures.
  • Extractor hook breakage: The extractor hook is under constant stress and can break, causing failures to extract and leading to potential jams.

Chambering Failures

  • Feed ramp misalignment: If the feed ramp is not properly aligned with the chamber, it can cause cartridges to fail to chamber correctly.
  • Chamber reaming issues: Poorly reamed or out-of-spec chambers can result in failure to fully chamber cartridges, causing malfunctions.

Slide And Firing Mechanism Issues

  • Slide stop issues: Malfunctioning slide stops can cause failure to lock back on an empty magazine or premature slide lock during firing.
  • Firing pin stop problems: A loose or improperly fitted firing pin stop can cause erratic firing pin strikes and misfires.

Trigger-Related Problems

  • Trigger pull issues: A gritty or heavy trigger pull can affect accuracy and overall shooting experience.
  • Trigger reset problems: A malfunctioning trigger reset can cause issues with follow-up shots and rapid fire.

Quality Control Problems

  • Inconsistent tolerances: Poor quality control during the manufacturing process can result in variances in tolerances, leading to reliability issues.
  • Substandard parts: The use of low-quality components can contribute to premature wear, decreased reliability, and potential failures.

Manufacturing Defects

  • Improperly fitted parts: Parts that are not properly fitted or machined can lead to various problems, including failures to function correctly and decreased accuracy.
  • Loose screws and pins: If screws and pins are not adequately tightened, they can work loose over time, causing potential malfunctions or safety concerns.

Finish Issues

  • Bluing wear: The bluing on the firearm can wear off over time, leading to rust and corrosion if not properly maintained.
  • Cerakote or coating peeling: If the applied coating is of poor quality or not applied correctly, it can peel or chip, affecting both aesthetics and protection.

Loose Parts

  • Grip panel fitment: Poorly fitted grip panels can cause movement and rattling during firing, affecting both accuracy and comfort.
  • Loose sights: Sights that come loose can result in decreased accuracy and require frequent adjustments.

Remember, despite these potential issues, the auto ordnance 1911 remains a reliable and popular choice for many shooters. Regular maintenance, proper ammunition selection, and attention to detail can mitigate many of the problems mentioned above.

Troubleshooting Auto Ordnance 1911 Problems

Auto Ordnance 1911 Problems

If you own an auto ordnance 1911 pistol and you’re experiencing some issues, don’t fret just yet. Like any mechanical device, firearms can sometimes encounter problems. Fortunately, many of the common issues with the auto ordnance 1911 can be troubleshooted and addressed without the need for professional gunsmithing assistance.

In this section, we will explore some troubleshooting steps to help you identify, diagnose, and fix any problems you may be encountering with your auto ordnance 1911. Let’s dive in!

Identifying The Problem:

  • Take note of any malfunctions or abnormal behavior of your auto ordnance 1911.
  • Pay attention to any error messages or warning signs.
  • Check if the problems occur consistently or sporadically.

Performing A Function Check:

  • Ensure that the slide moves smoothly and locks securely.
  • Verify that the safety features function correctly.
  • Test the trigger pull and reset.

Inspecting The Barrel And Chamber:

  • Check for any obstructions or debris in the barrel.
  • Inspect the chamber for signs of damage or excessive wear.
  • Clean the barrel and chamber thoroughly.

Examining The Slide And Firing Mechanism:

  • Inspect the slide for any signs of wear, deformation, or damage.
  • Ensure that all firing mechanism components are properly aligned and functioning correctly.
  • Lubricate the slide and firing mechanism as recommended by the manufacturer.

Fixing Failure To Feed Issues:

  • Check if the ammunition is the correct caliber and suitable for the auto ordnance 1911.
  • Clean and lubricate the magazine to ensure smooth feeding.
  • Consider adjusting the feed ramp or replacing it if necessary.

Checking The Magazine:

  • Inspect the magazine for any damage or deformities.
  • Clean the magazine thoroughly, removing any dirt or debris.
  • Test the magazine with different types of ammunition.

Examining The Extractor:

  • Inspect the extractor for any signs of wear, damage, or improper installation.
  • Clean the extractor and ensure it moves freely.
  • Consider replacing the extractor if necessary.

Addressing Feed Ramp Problems:

  • Check the feed ramp for any signs of damage, wear, or roughness.
  • Polish the feed ramp to improve feeding reliability.
  • Consult a gunsmith if the feed ramp requires extensive work.

Resolving Slide Lock Back Issues:

  • Ensure that the magazine is properly inserted and securely locked in place.
  • Inspect the slide stop for any damage or signs of wear.
  • Check if the slide stop spring is functioning correctly.

Checking The Slide Stop:

Inspecting The Recoil Spring:

  • Check the recoil spring for any signs of wear or damage.
  • Ensure that the recoil spring is properly seated and functions smoothly.
  • Consider replacing the recoil spring if necessary.

Evaluating The Magazine:

  • Test the magazine with different types of ammunition to determine reliability.
  • Ensure that the magazine spring is functioning correctly.
  • Consider replacing the magazine if it consistently causes issues.

Addressing Manufacturing Defects:

  • If you suspect a manufacturing defect, contact auto ordnance for warranty support.
  • Provide detailed information about the problem and any troubleshooting steps you have performed.
  • Follow the instructions provided by auto ordnance for repair or replacement.

Contacting Auto Ordnance For Warranty Support:

  • Auto ordnance offers warranty support for their firearms.
  • Contact their customer service to report any problems with your auto ordnance 1911.
  • Follow their instructions to initiate the warranty claim process.

Seeking Professional Gunsmithing Assistance:

  • If you are unable to resolve the issues on your own, consider seeking the assistance of a professional gunsmith.
  • A skilled gunsmith can diagnose and repair more complex problems with your auto ordnance 1911.
  • Research reputable gunsmiths in your area and inquire about their expertise with the auto ordnance 1911.

Replacing Faulty Parts:

  • In some cases, replacing faulty parts may be necessary to address persistent problems.
  • Consult with auto ordnance or a qualified gunsmith to determine which parts need replacing.
  • Follow proper installation procedures or seek professional assistance when replacing parts.

Remember, safety should always be your top priority when handling firearms. If you are unsure about any troubleshooting steps or encounter any difficulties, it is best to consult a professional. By taking the necessary steps to identify and troubleshoot problems with your auto ordnance 1911, you can ensure that your firearm operates reliably and safely.

Preventing And Maintaining Auto Ordnance 1911 Pistols

Auto ordnance 1911 pistols are known for their outstanding performance and reliability. However, like any firearm, they require proper care and maintenance to ensure optimal functionality and prevent potential issues. In this section, we will discuss the key steps to preventing and maintaining auto ordnance 1911 pistols.

Proper Cleaning And Lubrication

Keeping your auto ordnance 1911 clean and properly lubricated is essential for its longevity and consistent performance. Here are some important points to remember:

  • Regularly clean your pistol after each use to remove dirt, debris, and residue.
  • Use a high-quality firearm cleaning kit specifically designed for 1911 pistols.
  • Ensure you are in a well-ventilated area and follow all safety precautions when using cleaning solvents.
  • Apply a light coat of lubricant to all the moving parts of the pistol to reduce friction and promote smooth operation.
  • Use a lubricant that is specifically formulated for firearms to prevent damage to the internal components.

Field Stripping And Cleaning Process

Field stripping refers to the procedure of disassembling the pistol to access its internal components for cleaning. Follow these steps for an effective field stripping and cleaning process:

  • Unload the pistol and remove the magazine.
  • Ensure the chamber is empty.
  • Depress the slide stop and remove the slide assembly.
  • Disassemble the pistol into its main components: Frame, slide, barrel, and recoil spring.
  • Clean each component thoroughly using a cleaning solvent and a brush.
  • Dry the components using a clean cloth or compressed air.
  • Apply a thin layer of lubricant to the applicable parts before reassembling the pistol.

Lubricating Key Components

Proper lubrication is crucial for the smooth operation of your auto ordnance 1911. Pay attention to these key components while lubricating your pistol:

  • Slide rails: Apply a small amount of lubricant to the slide rails to promote smooth sliding action.
  • Barrel hood and locking lugs: Apply a light coat of lubricant to these areas to ensure proper functionality.
  • Hammer and sear: Apply a small amount of lubricant to the hammer and sear engagement points to reduce friction.
  • Recoil spring: Apply a light coat of lubricant to the recoil spring to prevent corrosion and ensure efficient recoil operation.

Inspecting And Replacing Parts

Regular inspection of your auto ordnance 1911 is crucial to identify any worn-out or damaged parts that may affect the pistol’s performance. Consider the following points:

  • Conduct routine visual inspections of the pistol’s components, paying attention to signs of wear, damage, or corrosion.
  • If any parts appear damaged or worn, consult a professional gunsmith for proper replacement.
  • Common parts that may require replacement include springs, extractor, firing pin, or magazine springs.
  • Ensure any replacement parts are compatible with your specific auto ordnance 1911 model.

Regular Function Checks And Test Firing

To ensure your auto ordnance 1911 is functioning optimally, regular function checks and test firings are essential. Follow these guidelines:

  • Perform a function check after reassembling the pistol to ensure proper operation.
  • Test fire the pistol using recommended ammunition to verify its reliability and accuracy.
  • Take note of any unusual behavior, such as failure to feed, extract, or eject, and address these issues promptly.
  • Consult a professional gunsmith if you encounter persistent issues that affect the pistol’s performance.

Safety Precautions For Test Firing

Safety should always be a top priority when test firing your auto ordnance 1911. Remember these safety precautions:

  • Always follow proper firearm safety rules when handling the pistol.
  • Use a safe and suitable shooting range for test firing.
  • Ensure you have a clear and safe backstop to catch the fired rounds.
  • Wear appropriate eye and ear protection during test firing.

Evaluating Functionality After Maintenance

After performing maintenance on your auto ordnance 1911, it’s essential to evaluate its functionality. Consider the following steps:

  • Prior to loading live ammunition, verify the pistol’s functionality with snap caps or dummy rounds.
  • Check for proper feeding, extraction, ejection, and firing of the snap caps.
  • If any issues are detected, review the maintenance steps and consult with an expert if necessary.
  • Only proceed to live test firing once you are confident in the pistol’s performance.

Ensuring Proper Ammunition Compatibility

Using the correct ammunition is crucial to prevent malfunctions and potential damage to your auto ordnance 1911. Keep the following points in mind:

  • Refer to the pistol’s user manual or manufacturer’s recommendations for the appropriate ammunition.
  • Use only factory-produced, reliable ammunition from reputable manufacturers.
  • Avoid using reloaded or remanufactured ammunition of unknown quality.
  • Regularly check ammunition for signs of damage, corrosion, or compromised integrity.

Daily Carry Considerations

For those who rely on their auto ordnance 1911 as a daily carry pistol, here are some important considerations:

  • Invest in a quality holster that securely retains the pistol and provides easy access.
  • Choose a holster that covers the trigger guard for added safety.
  • Regularly practice drawing and gripping techniques to ensure a swift and reliable response.
  • Familiarize yourself with local laws and regulations regarding concealed carry.

Choosing The Right Holster

The right holster plays a crucial role in both safety and accessibility. Consider these factors when choosing a holster for your auto ordnance 1911:

  • Opt for a holster that securely fits your specific 1911 model to prevent unintentional movement.
  • Choose a holster made of high-quality materials that provide adequate retention and durability.
  • Consider your preferred method of carry (e.g., inside the waistband, outside the waistband) when selecting a holster style.
  • Ensure the holster is compatible with your body type and offers comfortable all-day carry.

Training For Proper Draw And Grip

Proper training in drawing and gripping techniques is essential for a quick and precise response with your auto ordnance 1911. Consider these training tips:

  • Seek professional instruction from certified firearms trainers.
  • Practice drawing your pistol from the holster using unloaded firearms or dummy rounds.
  • Focus on achieving a secure grip while maintaining trigger finger discipline.
  • Incorporate dynamic movement drills and gradually increase speed and accuracy.

Periodic Inspection Of Holster And Pistol

Regular inspection of both your holster and auto ordnance 1911 pistol is vital to ensure their continued functionality. Keep the following points in mind:

  • Routinely inspect your holster for signs of wear, loose stitching, or compromised retention.
  • Check your pistol for any build-up of dirt, debris, or residue that may affect its performance.
  • Address any issues promptly, such as replacing the holster or cleaning the pistol.
  • Regularly practice drawing and reholstering while maintaining a safe muzzle direction.

Proper maintenance and care are essential to keep your auto ordnance 1911 functioning flawlessly. By following these preventative measures and conducting regular inspections, you can enjoy many years of reliable performance from your cherished pistol.

Conclusion: Enhancing Your Auto Ordnance 1911 Experience

Auto Ordnance 1911 Problems

The auto ordnance 1911 is a classic firearm with a rich history. However, like any other gun, it may encounter some issues. In this section, we will discuss common problems faced by auto ordnance 1911 owners and share tips on how to enhance your overall experience with the firearm.

Common Problems Are Fixable

  • Failure to feed: If your auto ordnance 1911 is experiencing issues with feeding cartridges properly, there are a few things you can try to fix the problem:
  • Polish the feed ramp: A rough or improperly polished feed ramp can cause feeding problems. Ensure the feed ramp is smooth and free from any burrs or rough edges.
  • Check the magazine: A faulty or worn-out magazine could be the culprit. Inspect the magazine for any signs of damage or excessive wear, and consider replacing it if necessary.
  • Adjust the extractor tension: The extractor should have sufficient tension to ensure reliable extraction and ejection. You can adjust the tension by carefully bending the extractor fingers to achieve the desired results.
  • Slide not locking back after the last round: If your slide fails to lock back after firing the last round, you can try the following:
  • Check your grip: Sometimes, a weak grip can prevent the slide from locking back. Ensure you have a firm grip on the firearm to allow the slide stop to engage properly.
  • Inspect the slide stop: The slide stop may be worn or improperly fitted. Examine the slide stop for any signs of damage or excessive wear. If necessary, consider replacing it with a new one.

Regular Maintenance And Care

To keep your auto ordnance 1911 functioning at its best, regular maintenance and care are essential. Here are a few tips to help you with that:

  • Cleaning: Clean your firearm after each use to remove debris, fouling, and moisture that may affect its performance. Use appropriate cleaning tools, solvents, and lubricants recommended by the manufacturer.
  • Lubrication: Proper lubrication is key to ensuring smooth operation and preventing excessive wear. Apply a small amount of lubricant to the slide rails, barrel hood, and other key areas as specified in the owner’s manual.
  • Regular inspections: Regularly inspect your auto ordnance 1911 for any signs of wear, damage, or loose parts. Check the grips, sights, safety, and other components for proper function and security. Address any issues promptly to avoid further complications.

Seek Professional Help If Needed

While many issues with the auto ordnance 1911 can be addressed with some basic troubleshooting and maintenance, there may be instances where professional assistance is necessary. If you encounter persistent problems or are unsure about how to resolve an issue safely, it is best to seek help from a qualified gunsmith or firearms expert.

They have the knowledge and experience to diagnose and rectify any complex issues, ensuring your auto ordnance 1911 performs optimally and safely.

Enhancing your auto ordnance 1911 experience involves understanding common problems that can arise, practicing regular maintenance and care, and seeking professional assistance when required. By following these guidelines, you can ensure that your auto ordnance 1911 remains reliable, accurate, and enjoyable to shoot.

Happy shooting!

Frequently Asked Questions

What Are The Common Problems With The Auto Ordnance 1911?

The auto ordnance 1911 may experience issues with feeding, extraction, and jamming. It’s important to use high-quality ammunition and regularly clean and maintain the firearm to prevent these problems.

How Can I Fix Feeding Problems With My Auto Ordnance 1911?

To address feeding problems with your auto ordnance 1911, make sure the magazine is properly inserted and not overfilled. Additionally, check for any obstructions in the barrel and ensure the ammunition is the correct caliber and in good condition.

Why Does My Auto Ordnance 1911 Have Extraction Issues?

Extraction issues with the auto ordnance 1911 can be caused by a dirty or worn extractor, or improper lubrication. Clean and inspect the extractor, and if necessary, replace it. Regular maintenance and lubrication can help prevent extraction problems.

Conclusion

While the auto ordnance 1911 pistol has its fair share of problems, it still remains a popular choice among gun enthusiasts. The major issues with the pistol include reliability, feeding and extraction problems, and overall build quality. However, it is important to note that these problems can be rectified with proper maintenance and upgrades.

Despite its flaws, the auto ordnance 1911 offers a classic design and a historical connection to the iconic original. For those who are willing to put in the time and effort to address these issues, the pistol can still offer a satisfying shooting experience.

Ultimately, it is up to the individual buyer to weigh the pros and cons and make an informed decision. Overall, the auto ordnance 1911 may not be perfect but it still holds its place in the world of firearms.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *